Secador fludizador directo de fábrica serie XF para secar gránulos separados
El secador fluidizante también se denomina lecho fluidizado.. Consta de filtro de aire. , calentador ,máquina principal de lecho fluidizado, alimentador , separador ciclónico , plumero de bolsa de tela ,ventilador centrífugo de alta presión y mesa de operaciones. Porque las propiedades de las materias primas existen diferencias., cuando equipe el equipo de eliminación de polvo, debería considerar la necesidad práctica. Puede seleccionar el separador ciclónico y el plumero de bolsa de tela al mismo tiempo o uno de ellos.
Descripción
XF Series Fludizing Dryer for drying separated granule
XF Series Fludizing Dryer DESCRIPTION
The Boiling dryer is also call as fluidize-bed. Consta de filtro de aire., calentador, máquina principal de lecho fluidizado, alimentador, separador ciclónico, plumero de bolsa de tela, ventilador centrífugo de alta presión, y mesa de operaciones. El colector de polvo estará equipado de acuerdo con las propiedades de las materias primas.. Se puede utilizar separador ciclónico o plumero de bolsa de tela según las características del material., El separador ciclónico se utiliza principalmente para materiales de alta gravedad específica y el plumero de bolsa de tela se utiliza principalmente para materiales en polvo y granulados pequeños.. El dispositivo de alimentación de aire y la cinta transportadora son opcionales.. La fuente de calor puede utilizar vapor., electricidad, Horno de aire caliente según los requisitos del cliente..
XF Series Fludizing Dryer APPLICATION
This dryer is widely used for medicines, chemical raw materials, productos alimenticios, grain processing, alimentar, y etc. Example applicable materials such as raw medicine, tableta, Chinese medicine, health care products, drinks, alimentar, resina, citric acid and other powders. The suitable drying diameter of raw material is 0.1~6mm. The best drying diameter of raw material will be 0.5~3mm.
XF Series Fludizing Dryer WORKING PRINCIPLE
The granular solid material is fed to fluidized bed dryer by the feeder. The blower will blows the filtered clean hot air heated into the fluidized bed at the bottom of the distribution plate and fluidization to gas-solid heat and mass exchange to heat the solid material. The dried material is discharged from the discharge outlet. The exhaust gas is discharged from the top of the fluidized bed and the solid power will be collected by the cyclone separator or cloth bag duster.
XF Series Fludizing Dryer Installation Instructions
1.All equipment should be placed flat, fixed with foot screws, the components of a good seal.
2.Fan can be placed in the outdoor or indoor self silencer. Layout can be adjusted as appropriate depending on the circumstances.
XF Series Fludizing Dryer TECHNICAL PARAMETERS
| Model and specifications Technical Parameters | XF0.25-1 (Original XF10) | XF0.25-2 (Original XF20) | XF0.25-3 (Original XF30) | XF0.25-6 | XF0.3-2 | XF0.3-4 | XF0.3-6 | XF0.3-8 | XF0.3-10 | XF0.4-4 | XF0.4-6 |
| Area of bed layer (metro2) | 0.25 | 0.5 | 1.0 | 1.5 | 0.6 | 1.2 | 1.8 | 2.4 | 3.0 | 1.6 | 2.4 |
| Drying capacity (kg h2O/h) | 10-15 | 20-25 | 30-45 | 52-75 | -30 | 42-60 | 63-90 | 84-120 | 105-150 | 56-80 | 84 |
| Power of fan (kilovatios) | 5.5 | 7.5 | 15 | 22 | 7.5 | 18.5 | 30 | 37 | 48 | 30 | 37 |
| Temperature of air in (ohC) | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 |
| Temperature of air in (ohC) | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 |
| Dimensiones generales(main machine) L×W×H (metro) | 1×0.6 ×3.35 | 2×0.6 ×3.35 | 4×0.6 ×3.35 | 6×0.6 ×3.35 | 2×0.70 ×3.4 | 4×0.7 ×3.4 | 6×0.7 ×3.4 | 8×0.7 ×3.4 | 10×0.7 ×3.4 | 4×1 ×3.58 | 6×1 ×3.58 |
| Occupied area (metro2) | 18 | 25 | 35 | 40 | 25 | 38 | 45 | 56 | 70 | 18 | 56 |
| Model and specifications Technical Parameters | XF0.4-8 | XF0.4-10 | XF0.4-12 | XF0.5-4 (Original XF50) | XF0.5-6 | XF0.5-8 | XF0.5-10 | XF0.5-12 | XF0.5-14 | XF0.5-16 | XF0.5-18 |
| Area of bed layer (metro2) | 3.2 | 4.0 | 4.8 | 2.0 | 3.0 | 4.0 | 5.0 | 6.0 | 7.0 | 8.0 | 9.0 |
| Drying capacity (kg h2O/h) | 112-160 | 140-200 | 168-240 | 70-100 | 140-200 | 140-200 | 175-250 | 210-300 | 245-350 | 280-400 | 315-450 |
| Power of fan (kilovatios) | 44 | 66 | 66 | 30 | 66 | 66 | 90 | 90 | 150 | 150 | 165 |
| Temperature of air in (ohC) | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 | 120-140 |
| Temperature of air in (ohC) | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 | 40-60 |
| Dimensiones generales(main machine) L×W×H(metro) | 8×1 ×3.58 | 10×1 ×3.58 | 12×1.2 ×4.1 | 4×1.2 ×4.1 | 8×1.2 ×4.1 | 8×1.2 ×4.1 | 10×1.2 ×4.1 | 12×1.2 ×4.1 | 14×1.2 ×4.1 | 16×1.2 ×4.1 | 18×1.2 ×4.1 |
| Occupied area (metro2) | 74 | 82 | 96 | 50 | 70 | 82 | 100 | 140 | 180 | 225 | 268 |
Nota:
1.The feeding way has: a.star feeding b.combining star feeding air conveyor c.belt conveying d.decided by customer;
2.Automatic production can be realized.3.Besides the model above mentioned,the special model can also be designed and manufactured as request.4.According different raw material,the power of fan will be differ.
Reseñas
Aún no hay reseñas.