Secador de tambor de minería de la serie HZG para equipo de secado de polvo de lodo de lodo secador giratorio de lodo de lodo

Descripción

Secador de tambor de minería de la serie HZG para equipo de secado de polvo de lodo de lodo secador giratorio de lodo de lodo

Mining Drum Dryer WORKING PRINCIPLE
Mining Drum Dryer is a kind of dryer with rotating cylinder body which is a little bit incline. The wet material is loaded from one end from the screw material adding device continuously, and is stirred by the bafflers that are uniformly distributed in the barrel.
The material is uniformly distributed and dispersed in the dryer and fully contacts the hot air of counter flow. When the material passing through the cylinder inside surface, it will contact with the hot air circling inside and being dried .Most of the dried product will be discharged from the other end of the dryer. Small part of the fine granule goes into the cyclone separator with the exhaust air. The powder will be separated and collected, and the exhausted air will be ejected to the atmosphere. During the drying course, the material will slowly move to the lower end from the higher part recur to the slowness rotating of the cylinder.
Mining Drum Dryer FEATURES
(1) Large throughput capacity and continuous operation
(2) Simple configuration and easy to operate
(3) Good adaptability of materials
(4) Bajo consumo de energía
(5) Low maintenance cost
Mining Drum Dryer APPLICATION
This dryer widely used in the following industries:
-Drying large particles and heavy material for chemical, mining, metallurgy and other industries, such as mining, escoria de alto horno, carbón, polvo metálico, fertilizante, ammonium sulfate.
-Drying powder or granular materials which have special requirements, such as HP vesicant, lees residue, precipitated calcium carbonate, activated clay, polvo magnético, grafito, dregs.
-Drying the material which required low-temperature and continuous drying process.

Mining Drum Dryer Technical Parameter