High Efficiency Equipment Sludge Drying Machine Mixer Hollow Blade Paddle Concrete Slag Dryer
Sludge Drying Machine（Hollow blade paddle Dryer ）is a thermal conduction and low-speed agitation type dryer. Installation of the jacket, which is equipped with hollow shaft and hollow tube leaves, the heat carrier into the wet material from the mixing paddle to complete processing of the tank, mixing blades heat the surface of the heat exchange, the raw material depletion.
Description
High Efficiency Equipment Sludge Drying Machine
Sludge Drying Machine Principle
KJG Hollow Blade dryer is a kind of contacting dryer. There is jacket on the body of dryer, hollow blade strongly welded on two hollow shafts, filling heating medium (could be hot water, steam or thermal oil) in them, wet raw material is heated, dried as well as driven forward by two shafts. It could be consisted of one to four shafts, whole operation will be finished in closed or partial closed environment.
Sludge Drying Machine Features
1. Drying efficiency could arrives 80%-90%. 2. The dryer support continuous operation and batch operation, support vacuum drying for thermal sensitive material and normal drying. Support heating, evaporating and cooling.3. Thermal oil, steam, hot water and chilling fluid are available to be used as heating/cooling medium4. Special structure of paddle which has large heating area.5. Structure of dryer is very compact, almost of the dryer could be transported by normal container.
Hollow Blade Dryer（Sludge Drying Machine） | |||||||||
Item | KJ G-2.7 | KJ G-9 | KJ G-13 | KJ G-18 | KJ G-24 | KJ G-29 | KJ G-36 | KJ G-41 | KJ G-48 |
Heat Transfer Area(㎡) | 2.7 | 9 | 13 | 18 | 24 | 29 | 36 | 41 | 48 |
Effective Volume(㎡) | 0.06 | 0.32 | 0.59 | 1.09 | 1.53 | 1.85 | 2.42 | 2.8 | 3.54 |
Rotating Speed(rpm) | 15-30 | 10-25 | 10-25 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 | 10-20 |
Power(kW) | 2.2 | 4 | 5.5 | 7.5 | 11 | 11 | 15 | 15 | 30 |
Width of Dryer Body(mm) | 306 | 584 | 762 | 940 | 1118 | 1118 | 1296 | 1296 | 1474 |
Total Width(mm) | 736 | 841 | 1066 | 1320 | 1474 | 1474 | 1676 | 1676 | 1854 |
Lengh of Dyer Body(mm) | 1956 | 2820 | 3048 | 3328 | 3454 | 4114 | 4115 | 4724 | 4724 |
Total Length(mm) | 2972 | 4876 | 5486 | 5918 | 6147 | 6808 | 6960 | 7570 | 7772 |
Distance between Feeding and Discharging(mm) | 1752 | 2540 | 2768 | 3048 | 3150 | 3810 | 3810 | 4420 | 4420 |
Height in Center(mm) | 380 | 380 | 534 | 610 | 762 | 762 | 915 | 915 | 1066 |
Total Height(mm) | 762 | 838 | 1092 | 1270 | 1524 | 1524 | 1778 | 1778 | 2032 |
Hollow Blade Dryer | |||||||||
Item | KJ G-52 | KJ G-62 | KJ G-68 | KJ G-73 | KJ G-81 | KJ G-87 | KJ G-95 | KJ G-110 | KJG-200 |
Heat Transfer Area(㎡) | 52 | 62 | 68 | 73 | 81 | 87 | 95 | 110 | 200 |
Effective Volume(㎡) | 3.96 | 4.79 | 5.21 | 5.78 | 6.43 | 7.39 | 8.07 | 9.46 | 15 |
Rotating Speed(rpm) | 10-20 | 10-20 | 10-20 | 5-15 | 5-15 | 5-15 | 5-15 | 5-10 | 5-10 |
Power(kW) | 30 | 45 | 45 | 55 | 55 | 75 | 75 | 75 | 110 |
Width of Dryer Body(mm) | 1474 | 1651 | 1652 | 1828 | 1828 | 2032 | 2032 | 2210 | 2500 |
Total Width(mm) | 1854 | 2134 | 2134 | 2286 | 2286 | 2438 | 2438 | 2668 | 2800 |
Lengh of Dyer Body(mm) | 5258 | 5410 | 5842 | 5461 | 6020 | 5537 | 6124 | 6122 | 9200 |
Total Length(mm) | 8306 | 8865 | 9296 | 9119 | 9678 | 9119 | 9704 | 9880 | 11000 |
Distance between Feeding and Discharging(mm) | 4954 | 4953 | 5384 | 5004 | 5562 | 5080 | 5664 | 5664 | 8700 |
Height in Center(mm) | 1066 | 1220 | 1220 | 1220 | 1220 | 1220 | 1220 | 1220 | 1250 |
Total Height(mm) | 2032 | 2362 | 2362 | 2464 | 2464 | 2566 | 2566 | 2668 | 3000 |
Title goes here.
Can be used for drying: antibiotic mycelium, fermentation residue, pharmaceutical waste, fertilizer, sludge, clay, feed, starch, etc.
Jiangsu Changshi Drying Technology Co., Ltd specializes in design, production and development of mixer, dryer, crusher, granulator, vibrating screen, dust collector and conveyor. The company has modern standard workshop buildings, engineering and technical personnel with medium and senior titles, more than 10 sets of processing equipment.The specialty provides complete set of powder equipment and solutions. In accordance with the GMP certification standard, the whole process of service is provided.
Multiple sets of advanced and sophisticated equipment
Complete and strict production control to be ensure the quality
Clean and tidy warehouse management
Sludge Drying Machine Service before sell:
—-Provide relative technical data for help equipment selection—-Running pilot test—-Offering advice for equipment selection, material analysis—-Provide flow chart, basic drawing—-Provide technical design
Sludge Drying Machine Service in sell:
—-Provide factory layout according to contract—-Manufacturing ordered equipment according to the related standard—-A presentation report of manufacturing situation will be offered every 15days—-Tracking and supervising in whole manufacturing and transporting period according to the contract requirement—-Photo of wooden case will be offered, wooden case with standard shipping marks.—-Photo of freight loading will be offered.—-A record of detailed delivery list will be offered—-A record of detailed freight loading list will be offered—-All of wooden case will be marked serial number, all of attachments will be marked serial number, convenient for client’s clearing
Sludge Drying Machine Service after sell:
—-Send service engineer for help instruct installation.—-Send service engineer for running test at site and training the operator—-Help client for maintenance and repair—-Provide one year spare part—-Quality warranty for two years after sell
1.Can I use this machine to extract some raw materials?
Yes, in order to help you better, we suggest you provide the name of the raw material you want to process. 2.Can I use my own raw materials for extraction test? Yes, of course. We can do extraction tests and send videos and test reports for your reference. 3.Do you have OEM service? Do you provide parts? Yes, we will, as long as you provide us with your drawings and detailed requirements. 4.How can we visit your factory? You can fly to Changzhou airport, or if you arrive in Shanghai, you can tell us your specific location. We will arrange a driver to pick you up. 5.How to transport equipment? We usually choose sea transportation. Laboratory models can be shipped by air according to customer requirements. 6.What is the voltage of the equipment? The equipment voltage is 110V~380V, the specification can be customized according to the voltage standard of the country where your equipment is used.
Reviews
There are no reviews yet.